Need some help?
Call 03300 553640

Redcoat Blockout

£5.00
Brand:
Short description:
RED-COAT  is a medium viscosity, water-soluble red block out designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-colour work. RED-COAT  is also very good for touching up...
Ask a question
REDCOAT-500ml
1 item(s)
+

RED-COAT is a medium viscosity, water-soluble red block out designed to fill the open areas of the screen not covered by the emulsion.

Use for masking several designs on a screen until ready to print or for multi-colour work.

RED-COAT is also very good for touching up pinholes.

  • When the screen is fully dry and free of contaminants, pour RED-COAT onto print side of the screen.
  • Spread over the entire open areas of the screen until completely filled.
  • Touch up and defects, including heavy blobs which tend to dry the outside and pop off or smear during the printing process.
  • When using very fine mesh counts, you may choose to reduce the viscosity by adding a small amount of water.
  • Block out is easily removed with water.
  • Dries fast
  • Easy to use
  • Useful with all mesh counts
  • Pleasant odour
  • Coverage in one coat
  • High contrast red colour
  •  Durable / High abrasion resistance
  •  Easily removed with water
  • Non-Hazardous
  • Biodegradable / Drain Safe

Tech Sheet (1430-red-coat-water-removable-blockout-data-sheet.pdf, 323 Kb) [Download]

SDS (red-coat__us_SDS.pdf, 51 Kb) [Download]