Metallic Black is from the MT series of which is a low cure stretch ink producing eye catching prints with excellent durability.
This Black is formulated for both light and dark fabrics.
This ink is ideal for printing onto those delicate fabric such as 100% Polyester, or substrates that may require stretch or low cure temparatures. .
Note: Pre-test on actual substrates before any full production run, for adhesion, wash fastness and other desired effects.
100% Cotton, 50/50 cotton/polyester blends, 100% polyester and some synthetics.
Ink should be printed without any modifications, if required this ink is compatible with most plastisol additives or modifiers.
SCREEN MESH AND EMULSION:
34T to 43T Screen mesh is recommended, Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or an equivalent.
65-75 Durometer sharp edge 65-90-65 or 75-90-75 triple Durometer.
149C (300F) entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Screen wash E or any environmentally friendly plastisol screen wash.