Need some help?
Call 03300 553640

CMS Pigment Concentrate

£7.71
Brand:
Short description:
Our CMS pigment is a ready to use solution for any water based ink system, whether it be in conjunction with the CCI range of water based or discharge products, or with another system. The pigment itself has been modified in its strength to allow for easier mixing of smaller quantities,...
Mixing Black
Ask a question
Price in points: 771 points
CMSBLACK-500
Out of stock

Our CMS pigment is a ready to use solution for any water based ink system, whether it be in conjunction with the CCI range of water based or discharge products, or with another system.

The pigment itself has been modified in its strength to allow for easier mixing of smaller quantities, whereas some other products made mixing 1 litre’s almost impossible with standard scales.

Please be sure to never over pigment your colour, this will affect the colour fastness.

We can supply this water based pigment in 500ml.

When using water based inks, a water resistant emulsion must be used. This water resistant emulsion will prevent any premature stencil breakdown during the printing process. We also recommend post hardening for all stencils used on long print runs.

Simply mix 90% base with 10% pigment loads or mix colours in accordance with our CMS mixing software. In extreme conditions of our WB Retarder can be added up to 5% to thin and slow down the air drying process of the ink.

Application: Print wet-on-wet without flash curing. Misting the on-press screens occasionally with water during long print runs is helpful. Degree of color/wash fastness is dependent on proper curing.

Mesh: 62T/cm to 120T/cm. The mesh count selected will determine how much squeegee pressure should be used.

Squeegee: 60-80 Single Durometer or 70/90/70 triple durometer. Typically heavy squeegee pressure is preferred.

Emulsion: Use WR-25 or any standard water based emulsion.

Cure Instructions: Minimum of 90 seconds at 160°C, Ideally for 2-3 minutes at 165-175 °C with high volume forced hot air is recommend during curing. Proper curing is extremely important overall colour and wash fastness.

Clean Up: General wash-up on ink that has not dried up can be done with water. EnviroSolv® should be used for an on-press cleaner and screen opener.

Storage: Store in original container. Keep tightly sealed. Store in cool, dry, well-ventilated area.

  • Ready to use solution for any water based ink system
  • CMS Pigment has been modified in its strength to allow for easier mixing of smaller quantities

SDS (CMS_Safety_Data_Sheet_a72i-ve.pdf, 54 Kb) [Download]

Tech Sheet (CMS_Safety_Data_Sheet.pdf, 54 Kb) [Download]

Recently Viewed Products