D-Flo is a fluorescent discharge ink which is suitable for any fabrics that are 100% dischargeable, producing an extremely soft hand.
D-Flo has bright fluorescent colours in black light settings which give exceptional florescent colours and can the product itself can be used in conjunction with other ink systems to produce multiple effects.
The rheology and flow characteristics of D-Flo allow for it to be printed with high mesh counts, this produces a very fine image detail and a softer finish for your product.
All D-Flo are available only in a finished ink and not as a pigment.
Many different colours are available in this kit but they can all be replaced directly from us. Order your D-Flo kit today.
How to use
How much squeegee pressure to use is dependent on mesh/fabric count (usually you will want to use heavy pressure).
Print wet on wet, no flash curing, or print flash print for more opacity.
During long runs it is helpful to mist the screens occasionally that are on press with water.
Cure the printed fabric for a minimum of 90secs at 160c, ideally 2-3mins at 171-176c
We recommend high volume forced air during curing.
Do not allow the print to dry before curing in an oven; the more moisture available the better discharge result.
The degree of colour/wash fastness is dependent on proper curing and hence is highly important.
Heat curing must be complete in order to assure the fabric does not retain the odour, re-cure if necessary.
Add retarder, up to 5% to prevent drying in the screens and provide more open time of the wet ink.
- Fluorescent discharge ink
- Suitable for any fabrics that are fully dischargeable
- Produces extremely soft hand
- Can be used in conjunction with other ink systems to produce multiple effects
SDS / Technical Information
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.