The Dip N Strip Concentrate is a combination ink degradant and emulsion remover for use with dip tanks like the DST-1 dip tank.
It works by breaking down both plastisol inks and water based inks residues whilst softening emulsion for easy removal with a water pressure spray afterwards.
For best results you want to mix the concentrate thoroughly at a 1:10 ratio with water.
The tedious task of reclaiming screens will never be as hated again!!!!
How to use
To achieve the best results from this product mix with water @ a ratio of 1 part concentrate to 10 parts water.
If you are filling a dip tank or another soaking solution be sure to add the water by volume first, then the concentrate after this is to avoid the solution foaming.
This solution can be used like a normal stencil remover and applied with a brush or pad, but be sure not to allow the solution to dry on the mesh as this will chemically lock the emulsion onto the mesh.
When using as a soaking solution imerse screen for approximately 1-2 minutes, the desired effect is only to soften the emulsion to allow easier removal.
- Non VOC
- Breaks down Ink & Emulsion
- Non Flammable
- Safe on all mesh types
- Drain safe product(before use)
- Built in Surfactants
- Ideal for plastisol, solvent and water based inks
SDS / Technical Information
HS Tariff Code